01The Soundboard

الوجه

The face that turns vibration into voice.

A thin plate of tonewood — spruce or cedar — worked down by hand. Too thick and it stays silent; too thin and it cannot bear the strings.

In Ibrahim’s workshop

Spruce and cedar faces — Engelmann, French, Canadian.

Ibrahim’s Instagram · 2023–2026 · to confirm

02The Rosette

الشمسية

Where the voice escapes — and the hand shows.

The main sound hole is filled with a carved rosette. Its geometry is often where a maker’s signature is easiest to recognise.

03Small Rosettes

الشمسيات الصغيرة

A pair of quieter voices.

Two smaller sound holes flank the main rosette, shaping how the instrument breathes and how its sound opens into the room.

04The Bridge

الفرس

Where string meets wood.

Glued directly to the soundboard, the bridge anchors the strings and passes every vibration into the face of the instrument.

05The Neck

الزند

Short, and without frets.

The fingerboard is fretless. Nothing stands between finger and string, so the player can reach the quarter-tones and inflections of the maqam.

In Ibrahim’s workshop

Fingerboards in ebony — Brazilian ebony on “The Prince”.

Ibrahim’s Instagram · 2026 · to confirm

06The Binding

Patience, measured in millimetres.

Hundreds of tiny pieces of wood frame the soundboard. The edge is rarely noticed — and it is where a maker’s patience is easiest to read.

In Ibrahim’s workshop

Every ornament and every shell inlay is planned before the first cut.

Time Out Tel Aviv · 2016 · to confirm

07The Bowl

الظَّهر

A back shaped like a half-pear.

The rounded bowl is the oud’s resonating chamber. Its depth and curvature decide how warm and deep the voice becomes.

In Ibrahim’s workshop

Amboyna, wenge, zebrano, ovangkol, eucalyptus, rosewood, maple and walnut.

Ibrahim’s Instagram · 2023–2026 · to confirm

08The Ribs

الأضلاع

Thin strips of wood, bent by hand.

Each rib is cut, heat-bent over a mould and fitted edge to edge. How many ribs, and which woods, are among a maker’s first decisions.

In Ibrahim’s workshop

Joined with bone glue he cooks himself — he says it carries the sound.

Forbes Israel · 2020 · to confirm

09The Strings

الأوتار

Eleven strings. One voice.

Most modern Arabic ouds carry five paired courses and a single bass, plucked with a long plectrum — the risha.

Handmade Arabic ouds · Jaffa

Every Oud
Has a Soul.

Handcrafted with precision, tradition, and a lifetime of dedication in the heart of Jaffa.

Ūd by Manol, Istanbul, 1916 · The Met, CC0

العود صوتٌ يصنعه صانعه

An oud is a voice, shaped by its maker.

Arabic line provisional — for native review

The Instruments

One oud.
One story.

Recent instruments from Ibrahim’s workshop, with the woods exactly as he described them. Each has its own page — and a direct line to ask about it.

All instruments

Commission

Build your oud.

Choose the bowl, the soundboard, the rosette and the kishutim — from the woods Ibrahim actually works with — and send your design straight to him.

Start designing

The Craftsman

A craft passed
through generations.

إبراهيم أبو رمانة

Ibrahim Abu Romaneh was born in Jaffa and learned to build ouds as a boy, at his father’s side. Today he builds and repairs instruments in a rooftop workshop above his home, looking out over the sea — about a month for every oud.

Draft from press & his own posts · to be confirmed with Ibrahim

  1. 1960s

    The neighbour’s tools

    An elderly oud maker in the neighbourhood teaches Ibrahim’s father, Samir — and leaves him his tools and moulds.

  2. Childhood

    At his father’s bench

    Ibrahim starts learning as a boy, watching and working beside Samir, who names him his heir.

  3. 1985 →

    Back to the roof

    Samir dies young. After years away from the workshop, Ibrahim climbs back up to it — and the craft continues.

  4. Today

    Thirty years at the bench

    More than thirty years of experience, by his own account — building, repairing, and hoping to pass the knowledge on.

Two half-built bowls, ribs fanned out
A finished bowl in pale, striped wood
Bowls and chisels on the workshop bench
Shaping a part at the workbench
Shell inlay framing a carved rosette
A finished bowl in figured maple

From the workshop · @aburomanehibrahim

Recognition

In the press
and on stage.

Commission an oud

Your sound.
His craft.

Tell Ibrahim what you play and what you hope to hear. Every conversation starts personally.

Message Ibrahim on WhatsApp