01The Soundboard
الوجه
The face that turns vibration into voice.
A thin plate of tonewood — spruce or cedar — worked down by hand. Too thick and it stays silent; too thin and it cannot bear the strings.
In Ibrahim’s workshop
Spruce and cedar faces — Engelmann, French, Canadian.
Ibrahim’s Instagram · 2023–2026 · to confirm
02The Rosette
الشمسية
Where the voice escapes — and the hand shows.
The main sound hole is filled with a carved rosette. Its geometry is often where a maker’s signature is easiest to recognise.
03Small Rosettes
الشمسيات الصغيرة
A pair of quieter voices.
Two smaller sound holes flank the main rosette, shaping how the instrument breathes and how its sound opens into the room.
04The Bridge
الفرس
Where string meets wood.
Glued directly to the soundboard, the bridge anchors the strings and passes every vibration into the face of the instrument.
05The Neck
الزند
Short, and without frets.
The fingerboard is fretless. Nothing stands between finger and string, so the player can reach the quarter-tones and inflections of the maqam.
In Ibrahim’s workshop
Fingerboards in ebony — Brazilian ebony on “The Prince”.
Ibrahim’s Instagram · 2026 · to confirm
06The Binding
Patience, measured in millimetres.
Hundreds of tiny pieces of wood frame the soundboard. The edge is rarely noticed — and it is where a maker’s patience is easiest to read.
In Ibrahim’s workshop
Every ornament and every shell inlay is planned before the first cut.
Time Out Tel Aviv · 2016 · to confirm
07The Bowl
الظَّهر
A back shaped like a half-pear.
The rounded bowl is the oud’s resonating chamber. Its depth and curvature decide how warm and deep the voice becomes.
In Ibrahim’s workshop
Amboyna, wenge, zebrano, ovangkol, eucalyptus, rosewood, maple and walnut.
Ibrahim’s Instagram · 2023–2026 · to confirm
08The Ribs
الأضلاع
Thin strips of wood, bent by hand.
Each rib is cut, heat-bent over a mould and fitted edge to edge. How many ribs, and which woods, are among a maker’s first decisions.
In Ibrahim’s workshop
Joined with bone glue he cooks himself — he says it carries the sound.
Forbes Israel · 2020 · to confirm
09The Strings
الأوتار
Eleven strings. One voice.
Most modern Arabic ouds carry five paired courses and a single bass, plucked with a long plectrum — the risha.
Handmade Arabic ouds · Jaffa
Every Oud
Has a Soul.
Handcrafted with precision, tradition, and a lifetime of dedication in the heart of Jaffa.
Ūd by Manol, Istanbul, 1916 · The Met, CC0
العود صوتٌ يصنعه صانعه
An oud is a voice, shaped by its maker.
Arabic line provisional — for native review
The Instruments
One oud.
One story.
Recent instruments from Ibrahim’s workshop, with the woods exactly as he described them. Each has its own page — and a direct line to ask about it.
Commission
Build your oud.
Choose the bowl, the soundboard, the rosette and the kishutim — from the woods Ibrahim actually works with — and send your design straight to him.
The Craftsman
A craft passed
through generations.
إبراهيم أبو رمانة
Ibrahim Abu Romaneh was born in Jaffa and learned to build ouds as a boy, at his father’s side. Today he builds and repairs instruments in a rooftop workshop above his home, looking out over the sea — about a month for every oud.
Draft from press & his own posts · to be confirmed with Ibrahim
1960s
The neighbour’s tools
An elderly oud maker in the neighbourhood teaches Ibrahim’s father, Samir — and leaves him his tools and moulds.
Childhood
At his father’s bench
Ibrahim starts learning as a boy, watching and working beside Samir, who names him his heir.
1985 →
Back to the roof
Samir dies young. After years away from the workshop, Ibrahim climbs back up to it — and the craft continues.
Today
Thirty years at the bench
More than thirty years of experience, by his own account — building, repairing, and hoping to pass the knowledge on.






From the workshop · @aburomanehibrahim
Recognition
In the press
and on stage.
- 2026Al-Saraya Theatre, JaffaMiftah | The Story of an OudWednesday, 15 July 2026, 8:00 pm · Al-Saraya Arab Theatre, Jaffa
- 2020Forbes IsraelProfessions Disappearing from the World: Jaffa's Last Oud MakerAs a child, Ibrahim Abu Romaneh learned the intricate craft of building the oud from his father. Now, with only a handful of oud makers left in the country, he is looking for someone to teach, so that they can take over from him one day
- 2020TheMarkerJaffa's Last Oud Maker – Will Ibrahim Find an Heir?Ibrahim's customers are musicians and music teachers from the Academy in Jerusalem – and of course Arab musicians too. "We Arabs in Israel are cut off from our heritage and cannot trade instruments with Iraq, Syria or Lebanon. That disconnection comes at a high price"
- 2016Time Out Tel AvivThe Workshops of Tel Aviv: Ibrahim the Oud MakerEvery day, Ibrahim Abu Romaneh climbs a flight of stairs in Jaffa and builds ancient musical instruments the way he learned from his father. Come and meet the city's long-established businesses
Played by
In the hands
of musicians.
Players who have played Ibrahim’s ouds or shared a stage with his work. Press reports that his customers include teachers from the Jerusalem Academy of Music and Arab musicians.
- Elias HaddoubOud player, JaffaSource: Instagram · 14 Jun 2024 ↗
- Gilad HazanOud player — visited the workshopSource: Instagram · 14 Jan 2026 ↗
- Mohammad QandasEducator and artist — hosted “The Story of an Oud”, Al-Saraya Theatre, 15 Jul 2026Source: Al-Saraya Theatre ↗
Repair & restoration
Your instrument, back in voice.
Ibrahim repairs and restores ouds and other instruments. Send a few photos and he’ll tell you what it needs.
Commission an oud
Your sound.
His craft.
Tell Ibrahim what you play and what you hope to hear. Every conversation starts personally.
- WhatsApp · 053-250-4929 ↗Fastest
- Instagram · @aburomanehibrahim ↗His page
- Facebook · oud factory ↗His page
- Shem HaGdolim 1, Jaffa ↗Workshop · by appointment





